If you have a heat recovery ventilator (HRV) in your home, you already know its many benefits. It’s an energy-efficient way to deliver fresher, healthier indoor air to your home. However, many homeowners need to familiarize themselves with the best way to use their HRV system. Here are some tips about how to set your HRV to maximize your home’s comfort and efficiency.
When it’s cold outside and you’re using your home’s furnace, it’s best to operate your heat recovery ventilator continuously. It ensures a consistent supply of fresh air and removes indoor air pollutants. This is especially true if you have a newer, air-tight home.
You can also set your HRV on “20/40” mode so that the HRV system operates for 20 minutes out of every hour. This provides adequate ventilation while reducing energy consumption.
You can change the speed to high for increased ventilation when you use paints, solvents or cleaning products. Other times to increase the HRV speed are when you’re cooking or smoking and when there are numerous people in the home.
Most HRV models feature an automatic defrost mode that kicks in whenever the outside air temperature falls below -5 C. This mode temporarily blocks the fresh air intake and allows warm air from the home to melt any frost and ice that’s formed in the pipes. The system resumes regular operation after the defrost is complete.
Your HRV can enhance your home’s air conditioning system during the summer. Again, run it all the time so fresh air can enter your home without the need to open windows and doors.
As a basic year-round rule, it’s best to let your HRV run continuously. You enjoy the continuous circulation of fresh air throughout your home while operating your HVAC system and minimizing energy loss.
The HRV’s dehumidistat allows you to control your home’s humidity levels. In general, your dehumidistat settings should be between 25 and 50 percent in the winter. Use the following temperatures to guide your settings:
Your professional HRV installer will be able to give you guidance on how to set your dehumidistat.
At Black Forest Plumbing, we provide HRV installation, repair and maintenance services for home and business owners throughout the Greater Toronto Area. Contact us today to get a quote on an HRV system installation, or book an appointment with one of our technicians.
When you own a home, there are so many different things to keep an eye on. Repairs, renovations, upgrades – it can be easily to overlook some of the little things such as light switches and outlets. Light switches and electrical outlets are an extremely important, but often overlooked, element of a home. If your […]
Read More… from 4 Reasons to Upgrade Your Home’s Light Switches and Outlets
Summer inspires us to elevate our outdoor spaces, and an outdoor shower is quite an exciting project you might consider this year. It adds a touch of luxury and convenience to your property, extending your enjoyment of the summer months. But before you break ground, it’s crucial to understand the plumbing requirements for a safe […]
Read More… from Plumbing Requirements for an Outdoor Shower in Ontario
Water heaters require regular maintenance to provide your home with consistent hot water for your showers, sinks and appliances. Over time, hard water deposits like calcium and lime can build up and cause considerable damage to your hot water tank. Here are three signs it’s time to get your water heater descaled. How often should […]
Read More… from 3 Signs You Should Have Your Water Heater Descaled
Winter is coming and it’s time to get your house ready for the cold weather. It’s best to start early since there are many things to do before the temperature drops. However, when preparing for the season, homeowners often forget about their hose bibbs. This plumbing component, also known as a spigot or an outdoor […]
Tiny homes are more affordable to build and maintain, are mobile if built on a trailer and significantly reduce your environmental footprint. If you’re considering building a tiny home in Ontario, here’s what you need to know about plumbing. Ontario Tiny Home Plumbing Regulations Ontario has special tiny house building codes concerning electrical wiring, windows […]
Your main drain line is the underground pipe that connects your house to the public sewer system. They’re typically 102 millimetres (four inches) in diameter and can run anywhere from five to 30 metres. You may not always see it if you have a problem with your main line, but here are some signs to […]
Read More… from Signs Your Main Drain Line Needs to Be Replaced
If the plumbing in your home or business is frequently slow or clogged, you may need to call a plumber. There are many ways of dealing with this issue, including hydro flushing. Here’s what you should know. How does it work? Hydro flushing involves using a flexible hose mounted with a special nozzle to spray […]
Read More… from Everything You Need to Know About Hydro Flushing
A sump pump is designed to protect your basement from the risk of flooding by draining water that accumulates in a sump pit. However, if your sump pump is constantly running without getting rid of water or keeps running even when there’s no water in the pit, you should act immediately. Here are a few […]
If you have a heat recovery ventilator (HRV) in your home, you already know its many benefits. It’s an energy-efficient way to deliver fresher, healthier indoor air to your home. However, many homeowners need to familiarize themselves with the best way to use their HRV system. Here are some tips about how to set your […]
Read More… from Should You Run Your Heat Recovery Ventilator System Continuously?
Although condensation on your toilet tank may seem harmless, it can damage your bathroom. A sweating toilet drips water onto your floor, and over time, the moisture can damage your flooring and rot your subflooring, requiring expensive repairs. Luckily, you can take a few steps to stop your toilet tank from sweating. Remove humidity from […]
Read More… from Toilet Tank Condensation: Causes and Prevention